5V output for video camera
2S-6S input power supported
LC filter permits ultra tidy fpv video
0.01/ 25/200/500/ 1000mW Switchable VTX with pigtail antenna
Integrated with Uart, connectable to betaflight FC (Support FC like Wolfwhoop OmnibusF4/OmnibusF4 Pro)
0.01mW-Power up and evaluate your system during a race with no interference
Assistance specification from another location changed by Betaflight, flight controller, OSD 5V BEC output, assistance power for receiver and video camera
LED display screen for suggesting CH/Band/Power
Operating Voltage: 7 – 26V
Power supply: 5V camera@under 0.5 A max
Output power:25 mw/200mw/500mw/ 1000mw
Range: As Much As 6-8km with omnidirectional RHCP antennas
Antenna type: pigtail antenna Antenna connector: MMCX to SMA Female
Video Format: NTSC/PAL
Port port: JST,6 pin
Weight:6.8 g(Leaving out antenna)
5645/5925/5945(E4/E7/E8) are not readily available take legal action against to FCC guideline. Choosing 5645/5925/5945(E4/E7/E8) will be invalid action.
37 channels are all above 5650 and listed below 5925MHz, which are legal to use in the U.S.A. with an amateur radio license.
This equipment is being sold under FCC’s amateur radio rules. Operators needs to require amateur radio license to operator lawfully in the US. Usage of amateur equipment without a license or usage of devices on limited frequencies could subject the operator to considerable fines by the FCC. By purchasing this equipment, the user is concurring that they understand these duties and will run the devices lawfully. More details associated to ARL, please go to http://www.arrl.org/getting-licensed.
- This Q1-upgrade-US is United States Version for Q1-upgrade
- MMCX has more breeding cycles and is more robust
- Traditional button+ nixie tube show control of frequency and power
- 0.01 mW to prevent nearby channel disturbance, Integrated Uart, connectable to betaflight FC
- Support specification remotely adjusted by Betaflight, flight controller, OSD, Suitable with betaflight 3.3 and 3.2