Just scan, connect, and See What you want!
( 1) Download app “iSmartViewPro”, click “More”–“One Key WiFi”– Input WiFi name and WiFi Password”, and then click “configure”.
(PS: pls make certain to link your mobile to WiFi, not 3G or 4G. The camera only deal with a 2.4 Ghz cordless channels)
( 2) When the phone sounds “Beeps”, put the mobile near to the cam(less than 1m) up until the camera LED blinks quickly, and then end up being constantly “On” status.
( 3) Click “Add Electronic camera” on app, then scan QR Code on camera or click “Lan Browse”, then input the original password “123456”. You can personalize the password after logging in which is very crucial
A. Can not link to WIFI
a. Make sure the APP variation is the most recent.
b. Ensure your WiFi has password, otherwise, you will set up failed
c. Make certain you have actually done the wifi configuration, check out youtube Video above
d. Ensure the Red LED always ON for the power cord, and the blue LED blinks or ON for the electronic camera.
If the power cord LED does not ON always please contact after-sales team for replacement.
e. Reboot the camera via plug out the cable for 1 minute and re-plug in the cable.
f. If above steps does not work, please reset the video camera through press and hold the reset button for 10 seconds, and the blue LED will be OFF for 1 2nd and after that flash gradually.
B. Movement Detection Email Setting
Advanced Settings > Alarm Setting > Motion Detect Armed ON, Save Photo on SD/FTP, Send Out Email When Alarm
If you require to set Email: Advanced Settings > Mail Setting > Fill Out all Blanks consisting of Authentication ON
- EASY SETUP Sonic Acknowledgment Technology featuring One Secret WiFi Setup makes setup so fast and easy,. Simply plug in the power cable television, download the ‘iSmartViewPro’ App and set it up by means of your Andr
- MOTION DETECTION Motion Detection with e-mail or push alert notifications based upon movement noticing technology. Motion detection sensibility can be changed by your, When the electronic camera found abnormity o
- REALLY SIMPLE SETUP You can put the Mini Security Cam on desk and adjust the viewing angle to your requirements or take the plastic part off and put it on the wall with the consisted of screws. Install th
- Problem Shooting Make sure the Red LED always ON for the power cord. Make the blue LED blinks or ON for the electronic camera. If the power cord LED does not ON always please contact after-sales group for replac
- PLEASE Please make sure the Wi-FIi is not 5G, and there is no special character on the Wi-FIi name and password. Please make certain there is a blinking blue light prior to you do the one-key Wi-FIi conf