Strips utilizes a magnetic sensor to sense if a window/door is opened or closed. With Strips in every doors and window you get full perimeter protection. With Strips you can quickly inspect that all windows and doors are closed, it informs you if something unanticipated occurs and it can be linked with other clever house devices using Z-Wave innovation. Compatible Z-Wave gateway controller required (sold individually). The days of drilling and wires are gone! At just under 3 mm, Strips fits undetectably in between the door/window and its frame. All you need to do is connect Strips to a Z-Wave gateway, then use the adhesive backing to stick the magnet to the door or window and the sensor to the frame. Strips is created for both indoor and outdoor environments. That implies you can utilize Strips for all your windows & doors, however likewise to monitor your storage or garage door. With a battery that has a life-span of approximately ten years it’s easy to forget the sensor once it’s mounted. However, the sensor keeps track of the remaining power in the battery and will let you understand when it’s running low. Strips is Z-Wave Plus certified. Z-Wave allows communication between smarthome devices, Strips can talk with you through your clever phone. In order to do this, you will require a Z-Wave gateway to include Strips into your smarthome network. Powered by liMnO2 built-in battery. Z-Wave Range: as much as 130 feet line of sight. Magnetic Variety: 0.6″. Indoor or Outside usage. Running Temperature: -4 ºF-140ºF(-20 ºC – 60ºC). Dimensions: 7.7″ x 0.6″ x 0.12″ magnet: 1.2″ x 0.43″ x 0.04″. Weight: 2oz No matter some unfavorable feedbacks from users who didn’t follow the installation manual – this is actually great and reputable z-wave device.
- Ultra-thin for invisible installation – fits in between your door/ window and frame
- Weatherproof – use it inside or outdoors (simply not on metal gate, it will interfere with Z-Wave signal)
- Integrated battery that lasts approximately 10 years. Made in Europe
- Z-Wave Plus Certified (ZC10-16085166), U.S./ Canada/Mexico frequency, Compatible with (contact seller if your controller is not on the list): Fibaro, HomeSeer, SmartThings, Vera, Zipato, WINK users: please DO NOT buy it. Wink supports extremely minimal command classes and does not work with a lot of new z-wave devices.Wink’s library commands is extremely limited for some reason.IMPORTANT: Check out the ENTIRE handbook thoroughly and pay unique focus on installing- the magnet MUST be lined up with the main sensor logo-to-logo when in “closed “position to avoid irregular performance. Contact seller in case of any problems and we’ll be happy to assist!