SETmell Wireless Household Alert Security System is an easy-to-install and DIY home security system, which is perfect for your office, home or house. Just rest in absolute simple!
To prevent incorrect alarms:
1. Mount the sensing unit far from direct sunshine, such as under an overhang, covered location, or in a non-metal box.
2. Mount the sensing unit away from the strong wind, that may lead to incorrect sense.3.
It may be handy (if you haven’t attempted yet) to move and mount the sensing unit in a higher position, then angle the sensing unit to face the driveway. This may ideally minimize the interference from objects in the distance and from sunlight.
4. Lastly, if none of these recommendations assist, attempt tapping over a little of the sensor location with black tape as this might lower sensing unit sensitivity.Before using this product
please note that there is a on/off switch at the side of the receiver, be sure to change the button to the “ON” position when using the alarm set. likewise need to examine the power supply for the receiver and sensor are working effectively. If the item has from power, they need Re-pairing the function.Specification: Power Supply(
3 x 1.5 V C batteries(not included ); Power Supply (PIR Sensing Unit):
1 x 9V batteries (not consisted of) PIR Sensor Finding range: 5-8 m/
16- 26 feet Interaction variety: 100m/ 300ft (IN THE
OPEN AIR)Weather condition resistant of PIR Sensing unit: IP44 Ring Volume of Receiver: 100dB (within 0.5 m/ 1.5 ft)Box Contents: 1 x
Receiver 2 x PIR Sensor 4 x Screw 1 x User’s manual Features Trustworthy long-distance variety,
( the distance from the sensors to the
receiver/alarm/chime)and detection variety of the infrared sensing unit of approximately 5-8m/ 16-26ft to keep you notified and safe. It can be effectively used for your home, workplace, shop, hotel or other buildings. with our consumers as leading concern, if there are any problems, please contact us freely.The alarm ring in the receiver ranges from 90dB to 115dB. 3 mode options (Sound/LED Flash/Sound and LED Flash)and 3 alert choices(High Volume Chime/Low Volume Chime/Off). Power Supply -Both 3 x 1.5 V type C batteries and the DC 6V power