1. Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;
2. Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor;
3. 4 general-purpose opto-couplers isolation input: can connect the limitation switch, emergency situation stop
switch, vehicle tool absolutely no, house switch etc.
4. Assistance for linking electronic handwheel;
5. Have 0-10V signal output, you can use mach3 software application to manage the spindle motor speed.
6. 4 general-purpose separated relay drive output user interface, can drive 4 relays for controlling the spindle begins, forward rotating and reverse rotating, pumps or other gadget;
7. 1 status LED, suggest connection status on the board.
motion control card for maker control, with strong professional.Requires the operator to have the pertinent expertise.If utilized poorly, may appear a mishap, please strictly follow the instructions and warnings using this item if you are uncertain, consulting engineers for assistance Very first time users, if you are not familiar with the item and software application features Mach3 In your test item, ensure the device’s power switch on hand, you can quickly switch off the power Suggests that users set up the emergency situation stop button and make sure the button is functioning appropriately. Please strictly follow the directions and cautions utilizing this product 1-year guarantee and technical assistance committed from SainSmart