1byone Wireless Household Alert Security System is an easy-to-install and DIY house security system, which is best for your office, house or home. Just rest in outright easy!To prevent
false alarms:1. Mount the sensor away from direct sunlight, such as under an overhang, covered location, or in a non-metal box.2.
It might be useful (if you haven’t tried yet) to move and mount the sensor in a higher position, then angle the sensor to face the driveway. This might ideally lower the interference from items in the distance and from sunlight.3.
Last but not least, if none of these ideas assist, try tapping over a little of the sensor area with black tape as this might lower sensing unit sensitivity.Doesn’t work or
does not work after sync: Ensure the installation range is OK, the working range has to do with 100m and likewise metal things and some family appliances can effect the working rang. The user needs to test prior to install the alarm unit.Specification: Power Supply(Receiver): AC 110-120V 60Hz Power
Supply(PIR Sensing unit):
3 x 1.5 V AAA batteries(not consisted of)PIR Sensor
Detecting variety: 5-8m/ 16-26ft Interaction variety: 100m/300ft(IN THE OPEN AIR)Weather condition resistant of PIR Sensor: IP44 Ring Volume of Receiver: 80dB (within 0.5 m/1.5 feet)Box Contents:1 x Receiver 1 x PIR Sensing unit 1 x Wall Plug 1 x Screw 1 x User’s manual Features Trusted Variety
-Interaction variety of as much as 100m/328ft(the range from
the sensors to
the receiver In THE OPEN AIR )and detection range of the infrared sensing unit of approximately 5-8m/ 16-26ft to effectively keep you alerted.Different Ringtones-The receiver is a doorbell style with 36 various ringtones for personal preferences.User-Friendly- There are 3 mode options (Sound/LED Flash/Sound and LED Flash)and 3 levels volume modification(High/ Middle/Low )from 25-80dB. PIR Innovation-Our sensing unit uses advanced passive-infrared( PIR)sensor to detect any motion within the detection range.